---

Addressed issues

The following issued have been fixed in the current release of Vicon Nexus.

❙     Pausing a pipeline operation caused a hang.

❙     Nexus AMTI force plate data captured at the wrong scale.

❙     Noraxon EMG digital device - crash during use.

❙     Start Capture button disabled for unconfigured videos, even when video cameras were disabled.

❙     When digital and analog devices were present, a device could go missing if the devices arrived in a different order.

❙     Bonita Video camera masks were not retained on restarting.

❙     Analog channel monitor threshold settings did not load properly.

❙     If the classification, patient, or session name was in Japanese, then recording a trial did not create an x2d in the session folder.

❙     Static subject calibration required you to look at the frame you were calibrating in order to run.

❙     Plug-in-Gait joint force and moment units should have shown that they are normalized to body weight.

❙     Subject measurements populated automatically, due to dependent parameters not being cleared.

❙     Graph switched to trajectory count during analog filter.

❙     Could not delete a model when model outputs or generated trajectories were present.

❙     Docking/un-docking windows multiple times resulted in a crash.

❙     View Lock: Lock function in camera view didn't get saved with a view type.

❙     Dummy subject caused monitor loading issues.

❙     Segment angle format was not stored with view type.

❙     Y axis of force plate graphs did not scale until threshold is broken.

❙     Long captures crashed Nexus.

❙     Remove Subject didn't remove model outputs.