Fit to Points

Trucks\translates the 3D view to fit the selected points into the view. If no points are selected, it will try to fit all the points in the view.

Center Selection

Center the selected object(s) in the current camera view.

Frame Selection

Frame the selected object(s) in the current camera view.

Face Points

If selected, the face points are rendered in the 3D view.

Calibration Brim Points

If selected, the calibration brim points are rendered in the 3D view.

Reconstruction Type Colors

If selected, face-points in the 3D view are colored according to their reconstruction type, ie yellow indicates that the point was reconstructed from a number of matched detections, orange indicates that the point contains one or more patch-matched, and red indicates that the point is fully predicted or interpolated.

If cleared, face-points in the 3D view are displayed in yellow.

Cameras

If selected, the cameras are rendered in the 3D view.

If cleared, cameras are not displayed in the 3D view.

Rays

Camera rays are lines from points back to the point in each camera that it is connected to. If the Rays option is selected, camera rays are displayed for the selected points.

ROM

If selected, displays points in the ROM frame in the 3D view (if one is loaded) as a set of pale blue dots.

If cleared, ROM points are not displayed in the 3D view.

Sticks

If selected, displays sticks in the 3D view if you have created a stick mesh.

If cleared, sticks are not displayed.

Point Labels :All

If selected, displays all point labels in the 3D view.